Banner_Mortar
You are here:Home/Mortar/Plastering/TPI M100 (Fine Plaster Mortar)

TPI M100 (Fine Plaster Mortar)

>>Shop Now<<

Finished plaster used for wall decoration that requires exquisite workmanship, the work will be smooth and fine. Suitable for mon brick wall. Or concrete block Both indoor and outdoor use. TIS 1776-2542 (Plate)

INFROMATION

Compound material between TPI Portland cement Crushed stone through the drying process and size up to 2 times and high quality chemicals from abroad. It has special properties for waterproofing. And cracking sesame Wall not slip And do not shrink after plastering. Suitable for a variety of applications. Just mix the water to the right proportion, it can be used immediately.

SUGGESTION

  • After mixing water It should be used within 2 h 30 minutes (1 bag of cement = 50 kg of water 12 liters)
  • It should be stored in a dry, damp and covered place.

WORK PROCEDURES

  • Clean and pour the water to the wall to be plastered to moderate.
  • Mix TPI (M100) plaster with 3: 1 volume of clean water.
  • Mix well.
  • Apply to the general putty. It can also be used in conjunction with a Mortar Machine.

TECHNICAL INFORMATION

  • Mixing 1 bag of water 12 liters of water
  • Weight 50 k.g.


Thickness (m.m.)/ Mortar 1 plastered canvas (sq.m.)/ Usage per square meter (k.g.) 10/ 2.88/ 17
Thickness (m.m.) Mortar 1 plastered canvas (sq.m.) Usage per square meter (k.g.) 15/ 2.16/ 23

RFQ

Form by ChronoForms - ChronoEngine.com