Banner_Nano_paint
You are here:Home/Nano Paint/Interior and Exterior Paint/TPI SUPER SPECIAL ARMOUR NANO TOP COAT PAINT (NP101S)

TPI SUPER SPECIAL ARMOUR NANO TOP COAT PAINT (NP101S)

>>Shop Now<<

A concentrated water-based coating paint that can be used to cover the original surface with only one leyer. Apply with a brush or roller for adjustable surface, retouching, and ready-to-use immediately. Do not mix water on top of NP100S or NP100SW. It helps to make the surface to be painted in different colors as needed. It also improves durability and can be wiped clean.

SCOPE OF USE

Apply in the desired area after painting NP100S or NP100SW and use both outside and inside the building.

HOW TO USE

  1. Wall preparation
    - Prepare walls and paint nano-super-special RPM NP100S or NP100SW paint. Apply primer according to the method specified in NP100S / NP100SW.
  2. Using
    - People color in the can together. No need to mix water or other materials. To adjust the viscosity to suit the work. Add water but not more than 10%
    - Use a brush or roller to apply 1 layer over the paint. Primer NP100S or NP100SW after drying completely.

QUANTITY OF USING

Contain/ Estimated painting area/ Dry at surface/ Harden dry
1/4 gallon/ 7 square meters/ 20-30 minutes/ 4 hours
1 gallon/ 28 square meters/ 20-30 minutes/ 4 hours
2.5 gallons/ 70 square meters/ 20-30 minutes/ 4 hours
5 gallons/ 140 square meters/ 20-30 minutes/ 4 hours

Note: * Application for 1 time.

 

 

RFQ

Form by ChronoForms - ChronoEngine.com